Showing posts with label ergonomics. Show all posts
Showing posts with label ergonomics. Show all posts

Friday, 3 August 2012

Flying the iPad - happiness at last

A couple of months ago I did a routine instrument curency flight. I was complaining to my instructor that Jeppesen, in their continuing move towards being a zero-customer-servce company, had dropped their "Express" approach chart service, where they sent you a new complete set of charts every two months.

"What's wrong with you?" he said, "Why aren't you using an iPad like everyone else?"

So, I asked around a bit, and decided to take the plunge into the 21st century and get one. The first question is, which kind? You can get them with varying amounts of memory, important if you're going to load them up with movies. Charts take quite a bit too. And you can get with or without mobile data. Without mobile data also means without built-in GPS, which would condemn you to using an external GPS with the attendant cables and clutter. So I went for 32 GBytes of memory - enough for aviation charts for the whole country, plus plenty of room for other stuff - and the 3G/GPS.

The universal consensus for the software to run was ForeFlight. I chose the more expensive option that shows you where you are on the plate as you fly an approach. Situational awareness is a good thing.

You have to hold the iPad somehow in the plane. Following recommendations, I bought a fold-out kneeboard from MyGoFlight. It seems sensible, the iPad goes on one side, displaying whatever chart you need, and a normal clipboard goes on the other side, for notes and whatever paper stuff you need.

I never really got it to work though. Unlike my regular kneeboard, which stays open, this one keeps trying to fold itself up during the flight. The worst was during landing, when it slithered down to my knees folded into a V-shape. I thought about improvising ways to hold it open, but it seemed complicated. I tried squishing the hinges with pliers, to tighten them up. This worked a little but it still wanted to fold up and slide down my leg in flight.

It seemed a good idea to protect the screen and reduce reflections and glare, so I also bought a pack of two fancy screen protectors. These were a dead loss - well, the first one was. I've never dared try the second. For a surface of this size, it's impossible to avoid trapping at least one dust particle unless you happen to have access to a clean room. Once that happens - which it will - any attempts to improve things just go rapidly downhill. The protector was in the garbage ten minutes after starting.

I needed a way to use the iPad in the helicopter - where the cyclic makes a big kneeboard impossible. So I also bought the simple knee board from MyGoFlight, and also a yoke mount. The yoke mount consists of a clamp, a spigot that clips into the back of the plastic iPad case, and a double-ended clamp that joins these two together. In my plane (Cessna 182), it didn't work out. It held the iPad so high that it obstructed most of the instruments - it would be totally unusable for IFR flight, and awkward even for VFR. I tried mounting the clamp sideways, with the clamp sticking out between the center and one arm of the yoke. That sort-of worked, but wasn't really ready for prime time. For one thing it unbalanced the yoke, so holding it straight for level flight required constant pressure. For another, the screen was vertical so it was hard to read from a normal flying position.

The built-in GPS works fine in my high-wing plane, and in the helicopter too. I found no need for an external GPS, unless you want to pay serious money for the Stratus and get in-flight weather as well. One surprising omission from ForeFlight is any kind of flight tracking. Luckily there is another app which does a wonderful job of this, called CloudAhoy. You start it at the beginning of a flight, and stop it at the end. Afterwards, when it can, it uploads all the flight data. Now you can go to www.cloudahoy.com and view your flight track, superimposed on Google Earth or a sectional, with complete data on altitude, speed and track. You can even relive the flight on Google Earth. The accuracy is astounding, even when you're taxiing. This is really a great app.

I flew a cross-country in the helicopter with the simple holder. I had the iPad on my left leg and my usual small clipboard on the right. Nothing got in the way of any of the controls. CloudAhoy worked perfectly, showing me afterwards the exact location of the private back-country airstrip I'd spotted. But climbing out on the second leg, I noticed the screen was blank. Pressing the button got me a message saying "I'm too hot, I've shut down". And indeed in the 34 degree (C) ambient heat in the Central Valley, with the sun blazing down through the canopy, it was too hot to touch. I'm very glad I wasn't relying on it to show me the details of an approach to minimums! It came back to life later but it's certainly a concern for relying on it as the only source of charts. I found afterwards that this is a common problem when flying with the iPad.

I could also use this setup in the plane, but I wanted to try one last thing. From Sporty's I bought some RAM mount spare parts, a "double ball adapter" and a "small double arm". My idea was to hold the iPad lower down and also to allow it to be angled a bit. This worked very nicely. The picture shows how it works. The thing that looks like a piston clips into the back of the iPad holder, allowing it to rotate and holding it at both right height and at a good angle for easy reading. There is just enough clearance to pull the yoke fully back.

I have one experiment left: from Sporty's I bought a screen protector called iVisor which claims to be reusable and hence be a solution to the dust problem. We'll see.

So, to summarize, what I have found works is:
I can't recommend the double kneeboard from MyGoFlight - I never got it to work and having attacked it with pliers and chipped the paint, I can't even sell it.

Thursday, 30 June 2011

The Porkolab: all of our agents are busy helping other customers

You've all called the "customer service" number for some faceless monolith like AT&T or Comcast and heard, over and over, "all our agents are busy helping other customers". The useful content - the denotative significance, as semanticists would say (though it might take them a couple of goes, especially if they've already started on the semiotic cocktails) - is "so you're just going to have to hang on for another hour or two". But what else is it saying? Why did they choose this rather than just stopping at "all our our agents are busy right now"?

The answer is of course that it is subtle psychological manipulation. If they just said "all our agents are busy", you could reasonably get cross after the third full cycle of hold music, asking yourself why they don't hire more agents. But because they say "helping other customers", there's an instinctive reaction - even amongst cynical uber-rationalist grouches such as myself - that this wouldn't quite be cricket. The subtext is "the other people they're helping are just as important as you are, you have no right to expect that you should be served any quicker". Clever, huh? Instead of being mad at Comcast for being such cheapskates and not hiring enough people, you feel guilty because you were putting yourself above your fellow man.

I'm sure they pay psychologists a lot of money to come up with this. It's amazing how easy it is to manipulate people's feelings without them realising - there are various recent books about this, though offhand I can't remember any of their titles.

Another good one is "your call is important to us". I don't actually care whether my call is important to them - I just care that it's important to me, because otherwise I would long since have given up listening to cheesy electronic renditions of classical music. But it really does work - even though you know it's a blatant lie, and the only reason your call has the slightest importance is because of the remote chance that you might transfer your custom elsewhere, it still takes a little of the edge off your impatience and anger.

Then there's "please listen carefully, because our menu has changed". Without knowing you personally, how can they possibly know whether it has changed since the last time you were obliged to take your cardiac health in your hands and call them? Nearly always, you can short-circuit all of the "press 1 to pay your bill, press 2 to order a new service, press 872344100000019461111 to complain about your existing service" by just banging away on the 0 button - guess how I know. But the subtext here is that not listening carefully would be on a par with conspicuously keeping your iPod earphones on during the cabin safety announcement. Not only would you be imperilling your own safety, but you would also be acting irresponsibly to society at large. You would be a Bad Person.

You may wonder how they decide exactly what subtle implicit psychological lies they decide to use. Do they have batteries of simulated users, with blood pressure monitors and positron scanners? Probably. I was inspired to write this partly by having to deal with Comcast, but also by a piece of business spam I got today (you know the kind of thing, very professional-looking emails inviting you to vitally important conferences about the latest developments in HR). It was from someone called Porkolab (a somewhat uncommon Hungarian family name, so I've learned). In British English, a "porkie" is rhyming slang for a lie (via "porky pie"). I'm sure the "porkolab" is just the place where they try out all these messages.

"Hey, we're getting a lot of complaints from Islamabad about people being rude to the call centre operators. I think we need some new decoy messages."

"OK, let's get on to the Porkolab and see what they can come up with."

Wednesday, 29 June 2011

Comcast - such awful customer service that words fail me

So yesterday, while I was eating breakfast, my Internet service went down. The lights on the cable modem weren't blinking, and indeed nothing worked. It was time to go the office anyway, so I figured they would have fixed it by the time I got home.

But they hadn't. Still nothing worked. After the usual "press 1 for this" hell, and a ten minute wait, I finally got to talk to someone. "Oh yes," he said, "we discovered a signal leak back in February, and you hadn't made a service appointment, so we turned off the service."

Hang on... "Did you tell me about the problem?" "Oh, we probably left something on the door."

"And what about reminders, like on each of the five bills I've paid in the meantime, or an email?" "Yeah, that would probably be a good idea, but we don't do that."

"OK, so now I've made a service appointment, can you reconnect the service?" "Oh no, we have to wait for the technician to inspect it".

So... they may or may not have told me, for sure I never saw anything. Then they sit on their hands for five months, and then cut off the service without warning. And this passes for their idea of customer service!

The service guy did come on time, though he called the wrong number to warn me he was on his way! And guess what... his conclusion was that a different service guy needed to come, maybe in a day or two, maybe not. And no, of course they can't restore the service even though it was working fine for five months with whatever fault exists.

Comcast is outrageously expensive, the only thing that stops me switching right away to AT&T is that I know for sure that their customer service is even worse. Sigh.

Monday, 9 May 2011

It has a button to do WHAT?

I recently set up a new computer at home to run Linux. That's another story, soon to be told. (It's an excellent idea, by the way). In the process of finding room for it, running cables and so on, I accidentally pulled on a cable and sent a bunch of stuff tumbling off the back of my bookcase. There it hung by its cables for several days. Since everything seemed to work, I didn't pay much attention.

Today I needed to print something. No printer. Hmm. In sorting out the mess of USB cables for the new mouse and keyboard, I'd unplugged it. Getting to the cable required untangling all the stuff which fell off a few days ago. No problem - just the cable modem and the WiFi router, and their associated cables. I restored everything to its place, and even tidied up a bit, feeling extremely virtuous.

It wasn't for a while that I noticed I no longer had an Internet connection. A quick glance at the cable modem showed that its usual array of blinking lights had been replaced by just one steady orange light. I looked around and everything seemed to be cabled correctly, so I power cycled the modem. The lights gradually lit up, then started blinking - success, I thought. But then suddenly they all went out, back to the status quo ante. Hmm, again.

I tried all the usual things, power cycling, unplugging, checking software. All the machines could still talk to each other, just not to the outside world. I even checked the television, in case there was a problem with the cable itself. It was fine.

At this point I was getting desperate. Of course, it could just happen that Comcast had an outage at the exact time that I sorted out my little mess. Nothing left but to give them a call - not something I was looking forward to, 20 minutes listening to hold music, get cut off, another 20 minutes, then an operator in Islamabad trying to pretend he's in the US... ouch, especially on a Sunday afternoon. Plus which, the only way I know to get the number is... from their website. Which I can't reach.

So I took another look around. On top of the black plastic modem I noticed a tiny black plastic button. Well, who knows, it might do something. I pressed it and instantly - kaboom! - all the lights started blinking and all was well with the world again. Out of curiosity I pressed it again - no more blinking lights. I looked closer. The one orange light that stayed on is marked "standby" and... yes, so is the button, almost illegibly.

So, the modem has a button you can press which stops it working. It does it so thoroughly that it stays not working, even if you power cycle it. Obviously, I must have pressed the button as I was retrieving and rearranging my boxes. But... WHY? Why put a button on a piece of consumer gear, intended to be used by technically unsophisticated people, whose sole purpose is to stop it working in a mysterious and mystifying way? Apart from the inconvenience, it must generate quite a lot of support calls, from people like me who press it accidentally then can't get anything to work. Support calls cost money, even when you outsource them to Bangladesh.

Somewhere there is someone who thought this was a good idea, such a good idea that they convinced Comcast that it was worth the cost of all those support calls and the risk of a bunch of unhappy customers. I would love to meet him and have him (well, it's almost certainly a him, statistically speaking) tell me exactly what he was thinking.

Friday, 6 May 2011

Culture in the Laundry Room

Like many Europeans, one of our minor surprises when we moved to the US was the laundry equipment. The top-loading washing machine with its vicious agitator swirling back and forth was not only three times bigger than anything we'd seen before, it also tore clothes apart three times as quickly. Maybe that's why casual clothing caught on so quickly in the US - anything with any kind of structure is rapidly reduced to a formless mess by the traditional top-loader. Another surprise is that the washer and dryer are considered to be part of the house, and are left in place by the previous owner - in Europe anything which isn't physically part of the structure moves with the owner.

Anyway, it quickly became urgent for us to replace the machines with something less destructive to our apparel. We bought a nice, civilized Bosch front-loading washer and matching dryer, and our clothes lasted a lot longer. It's true that when you find a dropped sock on the floor five seconds after starting the washer, a top-loader is handy. But having our clothes last for more than three washes made up for it.

All good things come to an end though. Our wash cycles started lasting longer and longer, until the machine was taking more than two hours to wash a few shirts. The service guy came, ran a bunch of diagnostics, and declared that there was noting wrong with the machine, but took $200 anyway. Then it started to smell bad. The service guy came again, took another $200, and declared that there was still nothing wrong with the machine. We certainly weren't going to pay him again, especially when a quick browse showed that we could buy a new machine for not much more money than we had already paid him.

A big surprise was the choice of brands: LG and Samsung. Pretty much nothing else is available. Bosch shows up on about page 10 of the web catalog, along with the traditional American brands like GE. Soon, we had a brand-new, non-smelly Samsung washing machine. Made for the American market, it is about twice as big as its predecessor, which is actually quite handy since it means you can stuff more washing into it.

One thing we weren't expecting was its cultural contribution to our household. We're used to things going beep - I've lost count of how many things beep. Most things beep when they've finished, like the microwave and the toaster. The fridge never really finishes, so it beeps if you leave the door open. I've never heard the garbage disposal beep, but there's probably some occasion when it does. So how is a poor appliance to compete in this melee of beeps? Well, Samsung has an answer. Whenever the washer wants attention - when it has finished, when it has started, and various other odd times as well - it plays the opening bars from Schubert's Trout Quintet.

This is sheer genius. Whoever would have thought of a washing machine that plays uplifting classical music? It really raises the bar for all of these appliances. The watery theme is perfect for a washer, though Handel's Water Music would be even better. The knife sharpener (if we had one - I prefer an old fashioned stone) should naturally play Katachurian's Sabre Dance when the knife is truly sharp. Haydn's Clock Symphony is a clear choice for the timer, and maybe his Miracle Symphony for the microwave.

But there could be more, much more. Twenty years ago nobody imagined there was a fortune to made in downloadable ringtones. Soon, all these appliances will be WiFi enabled, and you'll control your toaster from a web browser. Then, they can all have menus of tones for different things, and it can be monetized - a neologism which I'd hate if it wasn't so descriptively handy. For only $2.99, a choice of ten different tones for your bagel maker. Hmm, maybe I should patent it. But since I don't have the stomach for that (my last attempt at a personal patent got definitively rejected after I'd spent a serious amount of money on it), just consider this to be prior art.

Saturday, 9 April 2011

On Airline Seats

Having just spent 11 hours on an airline seat - with more to come - including several hours when I was pretending to be asleep but wasn't, I couldn't help reflecting on them. The seat in question was KLM Business Class. KLM is in the majority of long-haul airlines who give you a seat which is flat but not horizontal, on a 60-inch pitch. Only a few airlines - BA and Virgin among them - give you a horizontal bed.

Overall, KLM's seat was pretty good, as sleeping on a hillside goes. They've done a better job than Lufthansa, who use what seems to be the same seat design - Lufty gives you absolutely nowhere to put your book, or your glasses while you sleep. KLM's version is full of handy cubby-holes. There is just one weird thing. The socket for the headset is at the very back of a cubby-hole under the armrest, and the plug is a complicated triangular thing that has to be orientated correctly. I ended up on my knees in front of the seat trying to get my headset plugged in. Then I accidentally pulled it out, and since I couldn't repeat my act of worship without disturbing my sleeping neighbour, I resigned myself to no more sound. Eventually I did get it back in, but I can't imagine how everyone else deals with it. Surely it wouldn't have been hard to put it somewhere more accessible, like on the front of the seat?

BA was (as far as I know) the first with the lay-flat seat, in about 2001. The design has evolved since, but it's still basically the same. It gives you a full six-foot horizontal bed, with the additional advantage of complete isolation from your neighbour. The upstairs window seats have complete privacy, and a handy locker you can reach without standing up - and of course a magnificent view of whatever you happen to be flying over, such as this picture of Greenland. It is about as close to perfection as an airline seat can get. My wife likes her favourite seat, 64K, so much that she refuses first-class upgrades so she can keep it.

Air France's first attempt at a flat seat was a disaster. Their Mark I version was at quite a steep angle, so you constantly slid downhill. Every ten minutes or so you'd wake up, as your torso slid down into the space under the seat in front. To make it worse, the footrest was only a couple of inches wide, barely enough even for your ankles. So when you woke up you would first scrunch your ankles into the footrest, then wriggle yourself back up the seat, the thin metal digging painfully into the bones of your feet. That was definitely not a relaxing flight. I'm told they've improved it since, though I haven't had a chance to try it. (I will in a couple of weeks, so maybe I'll write a paxrep then).

Virgin deserves an honourable mention - full marks, and maybe some bonus points too, for trying. But like an over-eager child they tried too hard and ended up spoiling the effect. Their seat is truly flat, rather than made up of a footrest, swab and back. The mechanism involved is truly impressive. Rather than just reclining until eventually it goes flat, like the others, the seat rears up like the Loch Ness Monster then suddenly collapses forwards, so you sleep on the reverse side of what you sit on. Unfortunately it's also rather hard, so not as comfortable as it ought to be. The biggest problem, though, is that the mechanism is so complex that you can't operate it yourself - you have to get the crew to do it. If, like me, you like to switch back and forth between prone and sitting - especially on day flights - you're out of luck. Once it's bedtime, it's bedtime until they serve breakfast. Though I did once have a fantastic flight from London to Tokyo which was so empty that I had a bed and a seat, on opposite sides of the aisle.

It's easy to tell whether your airline has horizontal or flat-but-not-horizontal seats, before you fly. Just go to seatguru.com and look at the pitch. If it's much less than 72 inches, the seat can't possibly be flat. (The exception is Singapore, who make the seat wider so your feet stick into your forward neighbour's armrest. Sadly, my only recent flights on Singapore were in First, so I can't comment on how well this works).

Meanwhile, the US airlines still haven't got to grips with even the flat seat, 10 years after BA pioneered it. Their websites will tell you they are "introducing it on selected routes", but I know nobody who has managed to fly on one of these selected routes. They don't include obvious ones like across the Pacific, that's for sure. I think maybe United is still stuck in the same timewarp as when its stewardesses were below pension age.

Thursday, 11 February 2010

The Upgrade: Help! I can't get help!

Now that my VPN problem is solved, my Windows 7 system seems to be working reasonably well. I still can't find the IE cache, or rather I can find it and some things are there but a lot of other things aren't. And videos always start jerkily in the first few seconds, but then they get smoother. All of this is survivable.


But I did come across yet another "what were they thinking" a few days ago. I have quite a lot of old software on the machine - my very own Winlife32, dating back in its origins to 1992, for one. I have a version of "Corel Essentials" that I bought nearly ten years ago. I don't use it enough to justify going and spending $100 on a newer version, but it's handy when I do need it. PhotoPaint is an OK-ish inferior version of PhotoShop, with the great advantage compared to PhotoShop that I know how to use it. And CorelDraw is absolutely indispensible for making jam labels. So the other day I needed to annotate the pictures for my Divisumma Diary. I wanted to draw some arrows on them, which ought not to be difficult to do, but I couldn't find the trick. For once Google was no help, so I was driven to the ultimate recourse, the documentation. Or rather, since there isn't any, the online help. So I clicked the help button. And my brand new Windows 7 system said "I don't know how to open this file", or words to that effect. It turns out that brand spanking new Windows 7 can't open those crufty old fashioned .HLP files that came out with Windows 3.1. Which is a major pain if you have applications that still work that way, like my Corel stuff or indeed Winlife32.


Ah! But then there's an option that says "would you like to download WINHLP.EXE for Windows 7?" So I said yes, and was led through a maze of twisty little web pages, until I got asked which of several files I wanted to download. There was no basis for choosing, and the one that looked most likely (it had 32 in the name where the others had 64) downloaded then said, "this program will not run on your system". Eventually random selection found the right one. And then Corel help worked fine. So does WInlife32 help, although I have now discovered that the API it uses for drawing doesn't work on Windows 7 or Vista, so I guess I'll have to figure out what gratuitous change Microsoft has made there and figure out the fix for that.


So, some genius in Redmond decided that although there's a perfectly fine version of Winhelp that runs on Windows 7, and there are undoubtedly thousands of old apps out there that want to use it, they wouldn't put it on the (huge and bloated) distribution. Instead you have to go through an arcane process to download it, whereupon it works fine. What were they thinking???


Oh, and it turns out that there is no way to draw arrows with PhotoPaint, at least not the version I have, short of drawing the heads by hand, line by line. By the way there's also no way to draw a simple oval line with transparent fill, such as you might put around something to draw attention to it. I guess maybe I really should get one of the cheaper flavors of PhotoShop.

Monday, 18 January 2010

On Upgrading - or "what were they thinking?"


My desktop machine at home has had creeping software sickness for a long time. It was new about 4 years ago and has gradually got less and less likely to succeed at any given task. Visual Studio crashes quite often, which I've never seen anywhere else. Google Earth kind-of runs but is pretty much unusable. And so on. I've no idea why these things happen, there's no logical reason why software should wear out, but it seems that it does.

I resisted Vista for all of its sorry lifetime, wisely as it turned out. But everyone seems to be saying nice things about Windows 7, so I decided it was time to upgrade. At the same time I decided to swap the 250 Gbyte hard drive for a brand new 2 terabyte one. Not that I have anything that will use up that much disk space, but 250 GB was getting full.


The machine is something called an HP Media Center. It was a distress purchase, my previous machine had scrambled its hard drive and I had exactly 10 hours to get something important done, so I just rushed out to Fry's and bought what they recommended. Until now, I'd never had any reason to take the covers off. When I did, I found that the hard drive was totally, utterly inaccessible, hidden inside the machine, and mounted vertically (rather than horizontally as usual). No normal screwdriver could access any of the mounting screws. I tried undoing various other things, but nothing gave access to the screws. Eventually I figured I could just put the new drive loose on the floor of the box. But, since I don't give up easily, I wondered how the factory had ever managed to assemble the machine. More on that later.


So, having swapped the drive cables over to my brand-new, unformatted 2 TB disk, it was time to install Windows 7, which I had (legitimately) on a USB memory stick. (As an aside, in about 1994 I worked on one of the very first video-on-demand projects, at DEC. Part of the system was a 1 TB drive farm, which occupied four full-size racks. Of course the whole project was more than a decade ahead of its time, and flopped completely).


Since I had a new disk, I actually wanted to do an install from scratch. But still there is a great mystery here. Microsoft built Windows 7 because the adoption rate of Vista was so low - I've seen estimates of 20%. Yet you can only do an in situ upgrade from Vista. So if you're one of the 80% who never moved from XP, you're out of luck. Or rather, Microsoft is, because that's who loses money if people don't upgrade. XP is a perfectly fine system, I would not have upgraded but for my "software wear-out" problem. Most not-very-technical users will be completely put off by the complication of a from-scratch installation, followed by reinstalling all of their apps, and in all probability just won't bother. So what was Microsoft thinking when they made this decision?


So, I booted from the memory stick, Windows 7 started and everything seemed fine. Then it put up a screen asking me which disk I wanted to use. When I selected my new drive, I got an error, "cannot create system partition". That's dumb, I thought, surely a from-scratch installer should be able to partition and format a disk? Still, I was able to rig things up so that I booted from the old system, with the new disk connected. That way I could format the new disk from XP. Then I restarted the Windows 7 system again. The same thing happened.


It took a lot of frustration, much bad language, and a lot of googling before I found the solution to this. It turns out that since the early days of Vista, the installer has not been able to cope with having more than one drive or partition visible to it. If it does, it gives this misleading error message which gives absolutely no clue as to the problem, and which will certainly stop most people dead in their tracks. Yet MS had at least a year to fix this, preferably so installer could handle multiple connected drives, but failing that at least to give a better error message. Once again, what were they thinking?


Once I had this figured out and unplugged everything except the target drive, everything went fine. The system installed remarkably quickly, and subsequent reinstallation of all my apps went smoothly too. It took quite a while for further problems to emerge.


Meanwhile, I hadn't given up on the disk mounting problem. I picked up various tools - stubby screwdriver, offset screwdriver - from my local TrueValue, but none of them could get all of the hidden screws. Finally a trip to Fry's got me a tiny ratchet offset screwdriver with interchangeable bits. Using that, and a lot of missing flesh from my hands, I was able to remove the drive and install the new one. Still I wondered how on earth they did this at the factory? Then by chance I tidied my office and found the original hardware manual for the machine. This revealed the secret latch which allows the whole drive bay to be dismantled and removed. Of course it is much easier that way, but there would be no way to identify the secret latch without the manual.


Windows 7 ran smoothly for a while, but then I ran into a very odd problem. Double clicking on certain system-ish folders gives the message "Access Denied". Now, I am the only user of the machine, and of course have Administrator privilege, so what is going on? I tried changing access rights, but of course since I didn't have access in the first place, that didn't work. Finally, some extensive googling found a way round this, which involves going into the deepest depths of "advanced options" in the security screen, and changing ownership of the parent directory. It's at times like this that Linux is so attractive - although the commands are arcane, it is always reasonably easy to figure out what is going on. With Windows, it's either easy or next-to-impossible. The dumbed-down user interfaces give you few alternatives when things are partly broken.


So now, my new system seems to be working fine, and does very nearly everything my old one did. (There are still a few things to reinstall). One mystery is a system-created "shortcut" (i.e. softlink) which points to itself. This confuses Explorer no end, but since I have no idea what the folder is for, I daren't delete it. I also still haven't managed to find the cache directory for IE8 - I've found one of them, but only some files show up there. That's another mystery.

Wednesday, 25 November 2009

Ergonomics, Cars and Turn Signals


There's a book called "Turn Signals are the Facial Expressions of Automobiles", which deals at length with the kind of dysfunctional man-machine interfaces that annoy all of us from time to time. If it's true, then the automobiles made by Opel (the European arm of GM, at least for now) must have eaten something very nasty.

Turn signals (direction indicators for my UK readers, if any) have been operated in the same way ever since flashing lights replaced pop-up arms that stuck out of the side of the car, which is to say the early 1950s. You push the little arm up to turn left, down to turn right, and it stays there, making the corresponding lights flash, until either you straighten the wheel up after the turn, or you turn them off manually. It's simple, it's intuitive, and it's easy to build.

It's a shame that, along the way, manufacturers have never been able to agree about which side this otherwise universal control should be. So every now and then, when you rent a car, you find yourself turning on the wipers instead of signalling. Even so, it's immediately obvious what you've done, and what to do about it. Since turning the signals on and off is never an emergency, it's no more than a minor nuisance.

Sometimes it takes real genius to look beyond the mould of convention and make the leap to a new and far better way of doing things. Unfortunately genii are rare, and when the non-genius tries the result is rarely a success.

Such is the case at Opel (and their UK badge-engineered variant, Vauxhall). If something has been in use for over half a century, works well, and is familiar to every driver on the planet, then surely it must be time to come up with something gratuitously different. And so they have.

My guess is that someone on the production side worked out that the mechanism that holds the arm in place, and returns it to the neutral position as the wheel turns, represents a few dimes that could be saved in the production of every car thanks to the miracle of electronics. Who needs springs and cams when you can do the same thing with some silicon?

And so if your rental car turns out to be an Opel you will find that the indicator stalk is sprung so it always returns to the neutral position. To turn left, you push it up, the silicon equivalent of a cam and a spring remembers it is there, the signals blink, but the memory is strictly non-mechanical. This is surprising at first, but you barely notice. You make your turn, and when you straighten the wheel out afterwards another miracle of the electronic era turns the signal off. So far, so good.

The problem comes when you make a lane change. In the US of course this problem doesn't arise. People rarely signal at all, and never (in my experience) for a lane change. But in Europe people still do, and it seems polite to follow suit. Since there are no large steering wheel movements, the signal does not automatically cancel. You have to do it yourself. You can't move the stalk back to the neutral position, because it's already there. So what do you do? Well, the only option is to push it in the opposite direction, i.e. downwards if you were signalling left. This works, in that the left signal stops signalling. Unfortunately, what happens now is that you are signalling right instead. Given that you probably just pulled into the left lane, this will certainly confuse following traffic (if they pay any attention to these things). So now, how do you stop the right signal? Only one choice... push the stalk upwards. You can guess what that does. At this point, you just have to hope that the police are not close behind you, because if they are they will certainly pull you over and give you a breath test. (Well, maybe not if they are driving an Opel too, because then they will understand the problem).

I can say from experience that there exists some combination of circumstance and action that does completely turn off the indicators. You don't have to make a 360 degree turn on the highway, although it may start to feel like the only solution. However it's not something you can ever figure out or remember. Sometimes, some amount of waggling the stupid arm stops the signals, sometimes it doesn't. I've even heard of a case - certainly not from personal experience, as I'm sure you will realise - where a driver has become so frustrated at the stupid @#$^^%$@# thing that they have ended up yanking the stalk right off. (It's made of some feeble soapy plastic, that breaks very easily. No doubt this saves another cent or two on the production. I've also heard - not that I would know personally - that superglue will hold it in place well enough to last until the next rental).

My first experience of this technological leap was several years ago, in a rented Opel Zafira. It was a terrible car; if blogs had existed at the time, I would certainly have written more about it. But this the worst of its many sorry misfeatures. However I'm pleased to say the engineers at Opel are not deterred by any kind of temporary setback. My son is now learning to drive, in a Vauxhall. He swears that he will never, ever buy one - because of their bizarre and dysfunctional indicators. (And no, I hadn't told him what I thought of them).

It's a reassuring constant that when people, and companies, make mistakes, the last thing they will do is correct them, since that would be showing weakness. Instead they persevere, in full denial that they could ever have done anything wrong. Occasional lapses from such behaviour (such as the Austin Allegro's square steering wheel - and no, I'm not making it up - which indeed was corrected very quickly) are satisfyingly rare.


Monday, 14 September 2009

Ergonomics and Supermarkets


This morning I stopped in the Safeway next to the hotel I'm staying at, to get a couple of things. The staffed checkouts were quite busy, so against my better judgment I decided to use the self-service checkout for my three items.

I should really know better. With the honorable exception of ATMs - which somehow they got right early on and and which have stayed right ever since - just about ALL of these self-service booths seem to have been expressly designed to be impossible to use successfully without help. Which is why, for example, you will always find airline staff hanging round the self-service machines at airports. (Although they do mostly seem OK now, but for a long time they would always have some trick to catch you out just when you thought you were getting there. For example, the British Airways machines wanted to check the card used to buy the ticket - impossible if you had a company ticket issued through a travel agent. And I NEVER got a Lufthansa machine to work in the days when I flew with them just about every week).

Anyway back to Safeway. To my amazement, it let me scan all three items. As long as I ignored the irritating voiceover telling me about all the other things I could do, it seemed to be going well. Then came time to pay. I slid my card through the debit card reader, keyed my PIN, tapped "confirm", and all seemed well.

Except that the actual checkout screen said "amount paid $0.00". I pressed the help button and the store manager came along. Turns out you FIRST have to tell one screen how you want to pay, and THEN use the separate payment machine. It took several minutes to straighten it all out, made more complicated by the fact that I refused to scan my card again since I'm sure that I would then have ended up paying twice.

Now, how hard would it have been either:

a) to figure out that when you slide your card, you probably want to pay by card, so accept the payment

b) or if that is really too hard, then disable the card reader until you have made a payment choice?

In the end it all ended OK, in that I left the store with the items I wanted and didn't get arrested for shoplifting. But why does it have to be so painful?